Mold Remediation
Mold remediation is the process of containing, removing and cleaning mold growth, then fixing the moisture problem that caused it.
See mold remediationCall about leaks, musty odors, visible mold and moisture damage affecting a property in ZIP 90720.
Mold removal includes locating the moisture source, isolating the affected area, discarding what is not cleanable and drying the remaining material.
Related types of work include mold abatement, mold remediation, mold mitigation and mold cleanup. The scope should address visible mold growth, damp materials and the water intrusion or humidity problem behind them.

Local housing, humidity and property access can shape moisture control, containment and mold cleanup planning.
Renters occupy 35 percent of homes in 90720, so both tenants and owners may need a clear written record of leaks, damp materials, and visible mold before removal begins.
The median home in 90720 was built in 1965, so plumbing joints, roof penetrations, insulation, and lower level moisture should be checked when mold appears.
A single-family share of 72 percent means many properties have separate attics or foundations where damp wood and insulation can remain hidden from living areas.
A 21 percent share of seniors living alone means some households may benefit from help checking attics, crawl spaces, or rooms that are rarely entered.
If you are uncertain which page matches your property, choose a service below or ask by phone.
Mold remediation is the process of containing, removing and cleaning mold growth, then fixing the moisture problem that caused it.
See mold remediation
Black mold removal addresses dark mold growth on wood and drywall by isolating the space and clearing affected materials.
See black mold removal
Attic mold removal clears growth from insulation, rafters and roof sheathing while identifying the underlying airflow issue or leak.
See attic mold removal
Basement mold removal cleans mold from walls, floors, framing and stored items in damp basements and addresses the moisture behind it.
See basement mold removal
Under your home, crawl space mold removal cleans the subfloor, joists and insulation and deals with the moisture source.
See crawl space mold removal
Bathroom mold removal clears growth from grout, walls, ceilings and spaces behind showers while checking for leaks or poor ventilation.
See bathroom mold removal
Wall and drywall mold removal cuts out and replaces mold-damaged drywall and cleans the framing inside the wall.
See wall and drywall mold removal
Ducts, drain pans, coils and vents receive air duct mold removal to prevent the HVAC system from continuing to spread mold.
See HVAC and air duct mold removal
Water damage mold cleanup removes mold that grows after a leak or flood and dries the structure so it does not return.
See water damage mold cleanup
This service pairs a mold inspection with removal, so the crew finds where mold is growing and then cleans it out.
See mold inspection and removalA service link takes you to the nearest location page, with the main city page used if nothing closer is available.
Avoid disturbing growth, keep useful records and stop the water when you can do so safely.
Call (844) 352-3560According to Fixr, mold remediation typically ranges nationally from $1,500 to $9,000. Fixr gives a professional rate of $10 to $30 per square foot when an area exceeds about 10 square feet. The affected area, material types, repair work, drying and containment all shape your price.
Your policy and the source of moisture determine insurance coverage. Coverage may apply to a sudden covered water event, but policies commonly limit or exclude neglect, humidity and long-term leaks.
Ask about coverage for the water event and any mold sublimit, then document what an insurance claim requires before material removal.
California's Toxic Mold Protection Act includes a landlord written-disclosure section (Health and Safety Code 26147). By its own wording it applies only after the state adopts mold exposure standards, and the state health department has said it could not set them.
Under California's housing law, visible mold found by a health officer or code enforcement officer can make a rental substandard. Renters can contact their local health or code enforcement department to ask for an inspection.
Call any hour. Ask a mold cleanup specialist to walk you through the process ahead.
Containment matters because disturbing affected materials can move mold spores and dust into clean rooms.
Some people experience triggered allergy and asthma symptoms around mold. CDC guidance says those with lung disease, weak immune systems or asthma face more risk.
Insulation, framing or subfloor may remain wet after a surface looks dry. Moisture readings help define the affected area.
Cutting drywall or pulling carpet can release particles. Negative air pressure and HEPA filtration help limit movement.
Searches commonly use terms such as black mold and toxic mold. Mold risk cannot be judged by color, the CDC says.
Look for affected materials, repair needs, drying, containment, cleanup and price-changing factors in the scope.
When post-remediation verification is appropriate, use an independent assessor so the removal business does not evaluate its own work.
Ask how the leak, condensation or humidity problem will be found and corrected.
From the first assessment, mold remediation steps progress to containment removal, cleaning, drying and final inspection.
A moisture meter and, when useful, a thermal imaging camera help trace the moisture source and affected materials.
Poly sheeting forms a containment barrier. To restrict particles entering clean rooms, negative air pressure pairs with a HEPA air scrubber, which is an air filtration device.
Workers use protective equipment. Drywall removal could be necessary, along with demolition of other damaged porous materials.
Cleaning retained non-porous surfaces involves a HEPA vacuum followed by damp wiping. A dehumidifier and air movers support drying, while moisture readings track progress.
An independent assessor may complete post-remediation verification through clearance testing, air sampling or a visual inspection.
The work area can be isolated with plastic sheeting and negative air pressure. Access to shared walls, ventilation or plumbing may have to be arranged by a property manager.
Responsibility depends on the lease, the source of moisture and local rules. Keep photographs, document the growth and leak in a written report, and ask your insurer and the property owner which terms apply.
Published national ranges are only a starting point. The price depends on the affected area, materials, containment, drying and the repair needed to stop the moisture source.
Cleanup planning can begin after the water source is found. Next steps depend on property access, containment needs and the remediation scope.
You can reach someone by phone 24 hours a day. You can use the call to discuss property access and the assessment.
You can reach someone by phone 24 hours a day, even on holidays and weekends.